Faq

What is the purpose of the HYDROSET THERMOSTAT?

HYDROSET THERMOSTAT is an instrument you can easily use to manage the temperature of one or more heaters. The version with digital display allows you to view the temperature measured and set. It can be connected to cables, mats or other heating devices, up to a maximum of 500W.
 

How should I install my HYDROSET THERMOSTAT?

Position HYDROSET in a dry place and in such a way as to ensure it cannot fall into the water;
Lower the probe into the aquarium, into an area with good water recirculation.
Connect the heating device to HYDROSET and then connect HYDROSET to the mains.
 

How can I regulate the temperature using my HYDROSET WITHOUT DISPLAY?

Turn the regulation knob until the indicator shows the value chosen;
If the temperature is lower than the desired level, HYDROSET will automatically activate the heating device until the set temperature has been reached. A light will come on during this stage;
The temperature can be set from a min. of 18°C to a max. of 35°C.
 

How can I regulate the temperature using my HYDROSET WITH DISPLAY?

The temperature set is indicated on the right side of the display; the temperature measured by the probe is indicated on the left;
Turn the regulation knob until it shows the desired temperature;
If the temperature is lower than the desired level, HYDROSET will automatically activate the heating device until the set temperature has been reached. The symbol  0 will appear on the bottom left of the display during this stage.
The temperature can be set from a min. of 5°C to a max. of 35°C.
 

The water temperature is lower than the level I would like. What can I do?

Check that you have set the temperature correctly.
Check that the device is plugged in and check that there is voltage;
Check the ratio between the power of the heating element, the capacity of the tank and the room temperature.
Check that the temperature probe is below the level of the water.
The water temperature is higher than I would like.
Check that the temperature probe is below the level of the water.
Check that all the heating elements are connected to the thermostat socket.